5 energy way, p.o. box 1019, west warwick, ri 02893 usa tel. 800-424-9850/401-823-5200 ?fax 401-823-8723 ?email info@advint corp.com ?internet http://www.advintcorp.com polyimide film .005 (.13) rtv sealed tape sealed rtv seal to order: add 3m to end of part # to order: add rtv to end of part # note: rtv not available with hcs or hcis insulators low insertion force peel-a-way pga sockets features : ?d isposable carriers peel away after soldering. ?p eel-a-way ? tabs and full grid wafer supplied on all peel-a-way ? pga sockets. ? maximum air flow under pga for greater cooling. ? better flux rinse and cleaning. ?a llows inspection of solder joints on both sides of pcb. ? lowest profile with use of type -210 terminal. ?p eel-a-way ? disposable socket terminal carrier available in any configuration shown or custom designed to meet your specifications. te rminals and contacts: t erminal: brass - copper alloy (c36000) astm-b-16 contact: beryllium copper (c17200) astm-b-194 solder preform: 63% tin, 37% lead plating: t erminal: gold over nickel or ti n-lead over nickel contact: gold over nickel or ti n-lead over nickel gold per mil-g-45204 ti n-lead per mil-p-81728 nickel per qq-n-290 body material: ks/kis - polyimide film -269?c to 400?c (-452?f to 752?f) peel-a-way low insertion force pga sockets how to order 1 ks 068 -85 t g footprint dash # if applicable* terminal plating g - gold t - tin-lead contact plating g - gold t - tin-lead terminal type see next page for terminal types body type ks - 2.5 oz.(70.85 g) avg. insertion force kis - 1 oz.(28.34 g) avg. insertion force number of pins 004 to 484 *see pages 37 - 64 for pga footprints polyimide film polyimide film peel away after soldering to pcb. pcb solder fillets visible both sides for inspection and cleaning. sealant options peel-a-way ? covered by patent rights issued and/or pending. how to use: 1. place socket in pcb. 2. send pcb and socket through soldering operation. 3. peel away polyimide film carrier. inch/(mm ) products shown covered by patents issued and/or pending. specifications subject to change without notice. page 34
type -150 .072 dia. (1.83) .165 (4.19) .125 (3.18) .020 dia. (.51) .072 dia. (1.83) .165 (4.19) .125 (3.18) .020 dia. (.51) solder preform 5 energy way, p.o. box 1019, west warwick, ri 02893 usa tel. 800-424-9850/401-823-5200 ?fax 401-823-8723 ?email info@advint corp.com ?internet http://www.advintcorp.com inch/(mm ) products shown covered by patents issued and/or pending. specifications subject to change without notice. page 35 low insertion force peel-a-way pga sockets peel-a-way ? covered by patent rights issued and/or pending. t erminals for peel-a-way low insertion force pga sockets solder preform terminals standard quick turn terminals type -33 .072 dia. (1.83) .165 (4.19) .125 (3.18) .020 dia. (.51) type -51 .072 dia. (1.83) .020 dia. (.51) .110 (2.79) .130 (3.30) type -151 .072 dia. (1.83) .020 dia. (.51) .110 (2.79) .130 (3.30) solder preform type -04 .072 dia. (1.83) .028 dia. (.71) .120 (3.05) .110 (2.79) type -49 .072 dia. (1.83) .028 dia. (.71) .095 (2.41) .095 (2.41) type -85 .058 dia. (1.47) .038 dia. (.97) .155 (3.94) .031 (.79) solder preform pga sockets - intrusive reflow application polyimide film solder preform pc board preform after solder flow features : ? combines the labor of socket loading and solder application into one operation. ?e liminates the use of solder paste and screening operation. ?e liminates solder bridges and/or solder shorts due to excess solder. ?i nsures a reliable solder joint with controlled solder volume. ?i deal for surface mount and mixed technology applications. ? for custom solder preform terminal applications consult factory. ? see previous page for material specifications and how to order information. quick turn delivery available on standard terminal types. additional terminal types available. see terminal section for detailed terminal information. type -50 .072 dia. (1.83) .053 dia. (1.35) .155 (3.94) .031 (.79) type -176 .058 dia. (1.47) .155 (3.95) .031 (.79) .034 dia. (.86) type -210 not for use with rtv seal .058 dia. (1.47) .034 dia. (.86) .015 (.38) .155 (3.94) .058 dia. (1.47) .038 dia. (.97) .155 (3.94) .031 (.79) type -111 solder preform
|
